<?xml version="1.0"?>
<!DOCTYPE article
PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.4 20190208//EN"
       "JATS-journalpublishing1.dtd">
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" article-type="research-article" dtd-version="1.4" xml:lang="en">
 <front>
  <journal-meta>
   <journal-id journal-id-type="publisher-id">Herald of Technological University</journal-id>
   <journal-title-group>
    <journal-title xml:lang="en">Herald of Technological University</journal-title>
    <trans-title-group xml:lang="ru">
     <trans-title>ВЕСТНИК ТЕХНОЛОГИЧЕСКОГО УНИВЕРСИТЕТА</trans-title>
    </trans-title-group>
   </journal-title-group>
   <issn publication-format="print">3034-4689</issn>
  </journal-meta>
  <article-meta>
   <article-id pub-id-type="publisher-id">103086</article-id>
   <article-id pub-id-type="doi">10.55421/3034-4689_2025_28_7_99</article-id>
   <article-categories>
    <subj-group subj-group-type="toc-heading" xml:lang="ru">
     <subject>2. Химическая технология</subject>
    </subj-group>
    <subj-group subj-group-type="toc-heading" xml:lang="en">
     <subject>2. Chemical Technology</subject>
    </subj-group>
    <subj-group>
     <subject>2. Химическая технология</subject>
    </subj-group>
   </article-categories>
   <title-group>
    <article-title xml:lang="en">OBTAINING AND STUDYING THE PROPERTIES OF COMPOSITE MATERIALS WITHOUT RESINS BASED ON COMMON REED</article-title>
    <trans-title-group xml:lang="ru">
     <trans-title>ПОЛУЧЕНИЕ И ИССЛЕДОВАНИЕ СВОЙСТВ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ БЕЗ ПРИМЕНЕНИЯ СВЯЗУЮЩИХ ВЕЩЕСТВ НА ОСНОВЕ ТРОСТНИКА ОБЫКНОВЕННОГО</trans-title>
    </trans-title-group>
   </title-group>
   <contrib-group content-type="authors">
    <contrib contrib-type="author">
     <name-alternatives>
      <name xml:lang="ru">
       <surname>Артёмов</surname>
       <given-names>Артём Вячеславович</given-names>
      </name>
      <name xml:lang="en">
       <surname>Artemov</surname>
       <given-names>Artem Vyacheslavovich</given-names>
      </name>
     </name-alternatives>
     <email>artemovav@m.usfeu.ru</email>
     <xref ref-type="aff" rid="aff-1"/>
    </contrib>
    <contrib contrib-type="author">
     <name-alternatives>
      <name xml:lang="ru">
       <surname>Шкуро</surname>
       <given-names>Алексей Евгеньевич</given-names>
      </name>
      <name xml:lang="en">
       <surname>Shkuro</surname>
       <given-names>Aleksey Evgen'evich</given-names>
      </name>
     </name-alternatives>
     <email>shkuroae@m.usfeu.ru</email>
     <bio xml:lang="ru">
      <p>доктор технических наук;</p>
     </bio>
     <bio xml:lang="en">
      <p>doctor of technical sciences;</p>
     </bio>
     <xref ref-type="aff" rid="aff-1"/>
    </contrib>
    <contrib contrib-type="author">
     <name-alternatives>
      <name xml:lang="ru">
       <surname>Усова</surname>
       <given-names>Кристина Алексеевна</given-names>
      </name>
      <name xml:lang="en">
       <surname>Usova</surname>
       <given-names>Kristina Alekseevna</given-names>
      </name>
     </name-alternatives>
     <xref ref-type="aff" rid="aff-2"/>
    </contrib>
    <contrib contrib-type="author">
     <name-alternatives>
      <name xml:lang="ru">
       <surname>Бурындин</surname>
       <given-names>Виктор Гаврилович</given-names>
      </name>
      <name xml:lang="en">
       <surname>Buryndin</surname>
       <given-names>Viktor Gavrilovich</given-names>
      </name>
     </name-alternatives>
     <email>vgb@usfeu.ru</email>
     <xref ref-type="aff" rid="aff-1"/>
    </contrib>
   </contrib-group>
   <aff-alternatives id="aff-1">
    <aff>
     <institution xml:lang="ru">Уральский государственный лесотехнический университет</institution>
    </aff>
    <aff>
     <institution xml:lang="en">Ural State Forest Engineering University</institution>
    </aff>
   </aff-alternatives>
   <aff-alternatives id="aff-2">
    <aff>
     <institution xml:lang="ru">Уральский государственный лесотехнический университет</institution>
     <city>Yekaterinburg</city>
     <country>RU</country>
    </aff>
    <aff>
     <institution xml:lang="en">Ural State Forestry Engineering University</institution>
     <city>Yekaterinburg</city>
     <country>RU</country>
    </aff>
   </aff-alternatives>
   <pub-date publication-format="print" date-type="pub" iso-8601-date="2025-08-07T21:38:00+03:00">
    <day>07</day>
    <month>08</month>
    <year>2025</year>
   </pub-date>
   <pub-date publication-format="electronic" date-type="pub" iso-8601-date="2025-08-07T21:38:00+03:00">
    <day>07</day>
    <month>08</month>
    <year>2025</year>
   </pub-date>
   <volume>28</volume>
   <issue>7</issue>
   <fpage>99</fpage>
   <lpage>106</lpage>
   <history>
    <date date-type="received" iso-8601-date="2025-08-07T00:00:00+03:00">
     <day>07</day>
     <month>08</month>
     <year>2025</year>
    </date>
   </history>
   <self-uri xlink:href="https://elibrary.ru/item.asp?id=82649544">https://elibrary.ru/item.asp?id=82649544</self-uri>
   <abstract xml:lang="ru">
    <p>Настоящее исследование является продолжением серии работ, посвященных пластикам без связующих (ПБС) на основе биомассы растительного происхождения. В настоящее время ряд ученых и производителей применяют биомассу однолетних растений в качестве наполнителя для композиционных материалов. Это решение позволяет снизить себестоимость продукции за счет замены традиционной ценной древесины. В качестве биомассы могут быть использованы как целые растения, так и их составляющие, такие как листья, стебли, побеги и другие части, в т.ч. и в виде порубочных остатков. Переход от технологии производства композиционных материалов на основе первичного природного сырья (древесины) к использованию вторичного сырья (аграрные и сельскохозяйственные отходы, растительная биомасса) должен обеспечить конкурентоспособность вторичного сырья по отношению к первичному. Одним из ключевых критериев, которым должно соответствовать вторичное сырье, является его стабильное образование или запасы в масштабных объемах с минимальными материальными затратами. Растительное сырье в виде биомассы тростника обыкновенного имеет такие характеристики. В данном исследовании предлагается использовать пресс-материал, основанный на биомассе тростника с фракцией частиц менее 1,2 мм, при этом общее содержание таких частиц в фракционированной биомассе составляет около 86%. Рекомендуется выделять частицы размером 0,7 мм и менее, так как они обладают наибольшей реакционной способностью в процессе пьезотермической обработки. Установлено, что прочностные свойства ПБС будут зависеть от более крупного размера и формы частиц. Высокие показатели прочностные свойства образцов ПБС были определены для пресс-сырья с фракцией 1,2 мм. На основе показателей водо- и влагопоглощения образцов ПБС можно сделать вывод, что исследуемый растительный наполнитель не в состоянии полностью заменить древесину. В целом, все ПБС, созданные на основе недревесного растительного сырья, демонстрируют низкие показатели водостойкости. Однако предшествующие исследования указывают на то, что для ПБС, основанных на недревесном растительном сырье, характерны начальные стадии биоразлагаемости, которые осуществляются по гидролитическому механизму. Фракционированная биомасса тростника включает одревесневшие части стебля. Эта часть обладает повышенной устойчивостью благодаря наличию лигнина в клеточных стенках, который имеет консервирующие свойства и выполняет антисептическую функцию. Результаты оценки степени биоразлагаемости ПБС по отношению к грунту за 90 сут и полученные маркерные морфологические признаки, свидетельствуют о том, что исследованные образцы можно отнести к материалам с умеренной (частичной) биоразлагаемостью, что обусловлено особенностями исходного наполнителя.</p>
   </abstract>
   <trans-abstract xml:lang="en">
    <p>The present study is a continuation of a series of papers devoted to plastics without resins (PWR) based on biomass of plant origin. Currently, a number of scientists and manufacturers are using biomass from annual plants as a filler for composite materials. This solution makes it possible to reduce the cost of production by replacing traditional valuable wood. Both whole plants and their components, such as leaves, stems, shoots and other parts, including in the form of felling residues, can be used as biomass. The transition from the production technology of composite materials based on primary natural raw materials (wood) to the use of secondary raw materials (agricultural and agricultural waste, plant biomass) should ensure the competitiveness of secondary raw materials in relation to primary. One of the key criteria that secondary raw materials should meet is their stable formation or large-scale reserves with minimal material costs. Vegetable raw materials in the form of biomass of common reed have the following characteristics. In this study, it is proposed to use a press material based on cane biomass with a particle fraction of less than 1.2 mm, while the total content of such particles in the fractionated biomass is about 86%. It is recommended to isolate particles with a size of 0.7 mm or less, as they have the highest reactivity during piezothermal treatment. It is established that the strength properties of PWR will depend on the larger size and shape of the particles. High strength properties of PWR samples were determined for press raw materials with a fraction of 1.2 mm. Based on the indicators of water and moisture absorption of PWR samples, it can be concluded that the studied vegetable filler is not able to completely replace wood. In general, all PWRs created on the basis of non-woody plant raw materials demonstrate low water resistance. However, previous studies indicate that PWRs based on non-woody plant raw materials are characterized by the initial stages of biodegradability, which are carried out by a hydrolytic mechanism. The fractionated biomass of cane includes both lamellar and needle-like particles, mainly consisting of the lignified part of the stem. This part has increased resistance due to the presence of lignin in the cell walls, which has preservative properties and performs an antiseptic function. The results of the assessment of the degree of biodegradability of PWR in relation to soil for 90 days and the obtained marker morphological features indicate that the studied samples can be attributed to materials with moderate (partial) biodegradability, due to the characteristics of the initial filler.</p>
   </trans-abstract>
   <kwd-group xml:lang="ru">
    <kwd>ПЛАСТИКИ</kwd>
    <kwd>РАСТИТЕЛЬНАЯ БИОМАССА</kwd>
    <kwd>ТРОСТНИК ОБЫКНОВЕННЫЙ</kwd>
    <kwd>ФИЗИКО-МЕХАНИЧЕСКИЕ СВОЙСТВА</kwd>
    <kwd>БИОРАЗЛАГАЕМОСТЬ</kwd>
   </kwd-group>
   <kwd-group xml:lang="en">
    <kwd>PLASTICS</kwd>
    <kwd>PLANT BIOMASS</kwd>
    <kwd>COMMON REED</kwd>
    <kwd>PHYSICAL AND MECHANICAL PROPERTIES</kwd>
    <kwd>BIODEGRADABILITY</kwd>
   </kwd-group>
  </article-meta>
 </front>
 <body>
  <p></p>
 </body>
 <back>
  <ref-list/>
 </back>
</article>
