The models for calculating the evaporation rate from the surface of the emergency pool are considered. The development of a multi-component model of pool unsteady evaporation of great interest.
аварийный пролив, испарение, численное моделирование, взрывоопасное облако, emergency pool, evaporation, numerical simulation, explosive cloud
1. B. Blocken, T. Stathopoulos, P. Saathoff, X. Wang, Numerical evaluation of pollutant dispersion in the built environment: Comparisons between models and experiments, J. Wind Eng. Ind. Aerodyn. 96 (2008) 1817-1831.
2. J. M. Santos, N. C. Reis Jr., E. V. Goulart, I. Mavroidis, Numerical simulation of flow and dispersion around an isolated cubical building: The effect of the atmospheric stratification, Atmos. Environ. 43 (2009) 5484-5492.
3. B. Zhang, G. Chen. Quantitative risk analysis of toxic gas release caused poisoning-A CFD and dose-response model combined approach. Process Saf. Environ. Prot. 88 (2010) 253-262.
4. E. Papanikolaou, M. Heitsch, D. Baraldi Validation of a numerical code for the simulation of a short-term CO2 release in an open environment: Effect of wind conditions and obstacles. J. Hazard. Mater. 190 (2011) 268-275.
5. Kawamura, P. I., Mackay, D., 1987. The evaporation of volatile liquids. Journal of Hazardous Materials 15, 343-364.
6. T. Kapias, R. F. Griffiths. Modelling the behaviour of spillages of sulfur trioxide and oleum. Health and Safety Executive, Contract Research Report 217/1999
7. RD-03-26-2007. Metodicheskie ukazaniya po ocenke posledstviy avariynyh vybrosov opasnyh veschestv / Ser. 27. - Vyp. 6 / Kol. avt. - M.: NTC «Promyshlennaya bezopasnost'», 2008.
8. Metodika ocenki posledstviy himicheskih avariy (Metodika «Toksi-2.2»): sb. dok-tov // Metodiki ocenki posledstviy avariy na opasnyh proizvodstvennyh ob'ektah. Ser.Vyp. 2 / Kol. avt. - 3-e izd., ispryu i dop. - M.: GUP NTC «Promyshlennaya bezopasnost'», 2006. - 208 s.
9. Dil’man, V. V., Lotkhov, V. A., Kulov, N. N., & Naidenov, V. I. (2000). Evaporation dynamics. Theor. Found. Chem. Eng., 34, 201-210.
10. G.D. McBain, H. Suehrcke, J.A. Harris, Evaporation from an open cylinder, Int. J. Heat Mass Transf. 43 (2000) 2117-2128.
11. Desoutter, G., Habchi, C., Cuenot, B., & Poinsot, T. (2009). DNS and modeling of the turbulent boundary layer over an evaporating liquid film. Int. J. Heat and Mass Transfer, 52, 6028-6041.
12. T. Vik, B.A. Pettersson Reif. Implementation of a new and improved evaporation model in Fluent. FFI-rapport 2011/00116, Norwegian Defence Research Establishment (FFI), 2011.
13. Starovoytova E.V., Galeev A.D., Ponikarov S.I. Modelirovanie paroobrazovaniya s poverhnosti avariynogo proliva szhizhennogo gaza. Vestnik Kazanskogo tehnologicheskogo universiteta, 2012, №4, s. 110-112.
14. Salin A.A., Galeev A.D., Ponikarov S.I. Sravnenie rezul'tatov chislennogo modelirovaniya ispareniya vodnogo rastvora ammiaka s eksperimental'nymi dannymi. Vestnik Kazanskogo tehnologicheskogo universiteta, 2012, №12, s. 225-227.
15. M.F. Fingas, Studies on the evaporation of crude oil and petroleum products: I. The relationship between evaporation rate and time, J. Hazard. Mater. 56 (1997) 227-236.
16. M.F. Fingas, Studies on the evaporation of crude oil and petroleum products: II. Boundary layer regulation, J. Hazard. Mater. 57 (1998) 41-58.
17. K. Okamoto, M. Hiramatsu, H. Miyamoto, T. Hino, M. Honma, N. Watanabe, Y. Hagimoto, K. Miwa, H. Ohtahi, Evaporation and diffusion behavior of fuel mixtures of gasoline and kerosene, Fire Saf. J. 49 (2012) 47-61.
