ISSLEDOVANIE VLIYANIYA INTENSIVNOY PLASTICHESKOY DEFORMACII VYDAVLIVANIEM NA PLASTICHNOST' I RAZRUSHENIE SPLAVOV
Authors:
1.
KNRTU named after A.N. Tupolev - KAI (KNITU-KAI)
2.
Kazan (Volga Region) Federal University Branch in NaberezhnyeChelny
3.
Kazan (Volga Region) Federal University Branch in NaberezhnyeChelny
4.
KNRTU
Type:
Article
Pages:
from 435
to 438
Status:
Published
Received:
20.04.2023
Accepted:
01.08.2025
Published:
01.08.2025
Subject area:
UDC 539.38
Language:
Russian
Keywords:
интенсивная пластическая деформация, выдавливание, пластичность, intense plastic deformation, extruding, plasticity
Abstract (English):
Given flow sheet of the developed method of the intense plastic deformation (IPD) by extruding. The efficiency of the influence IPD for the structure forming and properties, was evaluated by using the proposed method - the research method of the plasticity by the transversal extruding the samples. It is shown that the plasticity of the samples after several cycles IPD significantly (3-4 fold) are higher than the samples obtained by casting.
Given flow sheet of the developed method of the intense plastic deformation (IPD) by extruding. The efficiency of the influence IPD for the structure forming and properties, was evaluated by using the proposed method - the research method of the plasticity by the transversal extruding the samples. It is shown that the plasticity of the samples after several cycles IPD significantly (3-4 fold) are higher than the samples obtained by casting.
Keywords:
интенсивная пластическая деформация, выдавливание, пластичность, intense plastic deformation, extruding, plasticity
интенсивная пластическая деформация, выдавливание, пластичность, intense plastic deformation, extruding, plasticity
1. R.Z. Valiev, I.V. Aleksandrov.Nanostrukturnye materialy, poluchennye intensivnoy plasticheskoy deformaciey. Logos, Moskva, 2000. 272 s.
2. D.V. Orlov,7-ya Vserossiyskaya nauchnaya konferenciya studentov-fizikov (SPb, Rossiyskaya Federaciya, 2001). Tez. dokl. SPb, 2001.
3. Pat. Rossiyskoy Federacii 2189883 (2002).
4. O.V. Golubev.Diss. kand. tehn. nauk,Ufim. gos. aviac.tehn. un-t,Ufa, 1999. 146 s.
5. O.A. Kaybyshev. Sverhplastichnost' promyshlennyh splavov. Metallurgiya, Moskva, 1984. 264 s.
